Are you really sure that you want to do this? This is going to clear not only your user settings and configuration but will clear the entire program. YOU WILL NEED TO RELOAD YOUR APPLICATION SOFTWARE AFTER YOU DO THIS!!!
If you are completely sure and absolutely need to reset your Compass controller to factory defaults, follow the instructions below.
You will need:
- Make sure the power is on.
- Press and hold the paperclip in the hole next to the power switch.
AND at the same time, press and hold the 'SHTDN' button. Using the pen.
- Wait for the middle LED to turn orange.
- Release the buttons. Now all LEDs start blinking.
- Wait for the LEDs to stop blinking and turn solid blue or green.
- Optional if you have extension modules: Check if the LEDs are green. Repeat this procedure if the LEDs on the extension modules are blue. Because the reset procedure has not been executed correctly.