Tab only available if meter cards are used in your building.
Is not all energy data of your building digitally available? The meter card provides an overview of all manual meters within the organization. New values can be added manually here. If your building has meters that must be read manually, this tab is where you can enter the values you physically read on the meters.
The box in the top left corner titled 'Entry moment' indicates when the measurements will be entered. The date and time can be adjusted by clicking in the box on the date and time given.
The table provides a list of manual meters and allows for value entry. According to the columns of the table, for each entry, the table lists: the location of the meter, a short description of the meter, the type of meter, the previous meter reading value and date entered, followed by a box to enter the new value of the meter.
At the bottom of the tab, there is a white 'Enter' button on the left-hand side. Press this button to register all of the values added to the table. Click the "Meter card" button to return to the input screen. The saved values will be visible in the 'Previous value" column.