If you are using irrigation only in the Compass, you will see a simplified menu structure since we do not want to bother with many screens you don't need.
In case you are expecting to see the irrigation edition screens but are not, there are a few things you can check.
1) Look at the software license you ordered for the Compass. To activate the irrigation edition, you will need to have one advanced water system ordered and one advanced irrigation ordered.
2) Make sure you have the latest software on the Gateway and the controllers. The latest software can be found here.
3) You will need to make sure that the advanced water system and advanced irrigation are activated in the first zone in the controller.
4) The irrigation edition is activated when the controller is first connected to the gateway. Once you have updated the software, you may need to disconnect the controller and reconnect it again.